E-mail Us: inter-market@wnheater.com Call Us On: +86-15366416606
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
· Consistent heat for large quantities of liquids, gases, and oils.
· Custom design sizes and wattages available on request.
· Constructed from durable materials to withstand long-term use in harsh conditions.
· Stainless steel terminal enclosure.
· Stainless steel element spacers and thermostat tubes.
· Electrical fitting sockets to suit your requirements.
· Alternative sheath material available in stainless steel, Incoloy and titanium.
· Alternative flange material available on request.
Typically used for:
· Instant high temperature heat in asphalt and bitumen plants.
· Boiling hot water for a wide range of applications.
· Sterilising equipment and CIP (Clean In Place) systems.
· Heating large volumes of gases, oils, and chemicals.
· Heating wastewater as part of the treatment process.
FAQ:
1.Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .
2.What are the available product certifications?
We have certifications such as: ATEX, CE, CNEX. IS014001, OHSAS18001,SIRA, DCI. Etc
3.How to Choose an Industrial Heater?
It is important to consider the specifics of your application prior to selecting the heater to use. Of primary concern is the type of medium being heated and the amount of heating power required. Some industrial heaters have been specially designed to function in oils, viscous, or corrosive solutions.
However, not all heaters can be used with any material. It is important to confirm the desired heater will not be damaged by the process. In addition, it is necessary to select an electric heater that is appropriately sized. Be sure to determine and verify the voltage and wattage for the heater.
One important metric to consider is Watt Density. Watt density refers to the heat flow rate per square inch of surface heating. This metric shows how densely the heat is being transferred.
4.What type of temperature sensors are provided with the heater?
Each heater is provided with temperature sensors at the following locations:
1) on the heater element sheath to measure maximum sheath operating temperatures,
2) on the heater fange face to measure maximum exposed surface temperatures, and
3) An Exit temperature measurement is placed on the outlet pipe to measure the temperature of the medium at the outlet. The temperature sensor is a thermocouple or PT100 thermal resistance, according to customer requirements.
5.What other controls are needed for safe operation of the process heater?
The heater needs a safety device to ensure the safe operation of the heater.
Each heater is equipped with an internal temperature sensor, and the output signal must be connected to the control system to realize the over-temperature alarm of the electric heater to ensure the safe operation of the electric heater. For liquid media, the end user must ensure that the heater can only work when it is completely immersed in the fluid. For heating in the tank, the liquid level needs to be controlled to ensure compliance. The outlet temperature measuring device is installed on the user's pipeline to monitor the exit temperature of the medium.
 | Production Process |
| Applications |
| Packing |
| QC & Aftersales Service |
| Certificates |
· Consistent heat for large quantities of liquids, gases, and oils.
· Custom design sizes and wattages available on request.
· Constructed from durable materials to withstand long-term use in harsh conditions.
· Stainless steel terminal enclosure.
· Stainless steel element spacers and thermostat tubes.
· Electrical fitting sockets to suit your requirements.
· Alternative sheath material available in stainless steel, Incoloy and titanium.
· Alternative flange material available on request.
Typically used for:
· Instant high temperature heat in asphalt and bitumen plants.
· Boiling hot water for a wide range of applications.
· Sterilising equipment and CIP (Clean In Place) systems.
· Heating large volumes of gases, oils, and chemicals.
· Heating wastewater as part of the treatment process.
FAQ:
1.Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .
2.What are the available product certifications?
We have certifications such as: ATEX, CE, CNEX. IS014001, OHSAS18001,SIRA, DCI. Etc
3.How to Choose an Industrial Heater?
It is important to consider the specifics of your application prior to selecting the heater to use. Of primary concern is the type of medium being heated and the amount of heating power required. Some industrial heaters have been specially designed to function in oils, viscous, or corrosive solutions.
However, not all heaters can be used with any material. It is important to confirm the desired heater will not be damaged by the process. In addition, it is necessary to select an electric heater that is appropriately sized. Be sure to determine and verify the voltage and wattage for the heater.
One important metric to consider is Watt Density. Watt density refers to the heat flow rate per square inch of surface heating. This metric shows how densely the heat is being transferred.
4.What type of temperature sensors are provided with the heater?
Each heater is provided with temperature sensors at the following locations:
1) on the heater element sheath to measure maximum sheath operating temperatures,
2) on the heater fange face to measure maximum exposed surface temperatures, and
3) An Exit temperature measurement is placed on the outlet pipe to measure the temperature of the medium at the outlet. The temperature sensor is a thermocouple or PT100 thermal resistance, according to customer requirements.
5.What other controls are needed for safe operation of the process heater?
The heater needs a safety device to ensure the safe operation of the heater.
Each heater is equipped with an internal temperature sensor, and the output signal must be connected to the control system to realize the over-temperature alarm of the electric heater to ensure the safe operation of the electric heater. For liquid media, the end user must ensure that the heater can only work when it is completely immersed in the fluid. For heating in the tank, the liquid level needs to be controlled to ensure compliance. The outlet temperature measuring device is installed on the user's pipeline to monitor the exit temperature of the medium.
| Production Process |
| Applications |
| Packing |
| QC & Aftersales Service |
| Certificates |
